AzureWave AW-GA220 Bedienungsanleitung PDF herunterladen (Seite 48)

Basic AP Functions

My device does not turn on. No LED's light up.

Connect the power adapter to your AP and plug it into the power outlet.

Note: Only use the power adapter provided with your AP. Using any other

adapter may damage your AP.

LAN Connection Problems - I can't access my AP.

Make sure your AP is powered on.

Make sure that your computer has a compatible IP Address. Be sure that

the IP Address used on your computer is set to the same subnet as the AP.

For example, if the AP is set to 192.168.0.10, change the IP address of your

computer to 192.168.0.15 or another unique IP Address that corresponds

to the 192.168.0.X subnet. Use the Reset button located on the rear of the

AP to revert to the default settings.

I can't connect to other computers on my LAN.

Make sure that each computer has a unique IP Address. And the IP must be

in the same subnet as the AP. Make sure that the Link LED is on. If it is not, tr y

a different network cable. Check each computer for correct network

settings.

Wireless Troubleshooting

I can't access the Wireless AP from a wireless network card

Make sure that the Mode, SSID, Channel andEncr yption settings are set the

same on each wireless adapter. Make sure that your computer is within

range and free from any strong electrical devices that may cause

interference. Check your IP Address to make sure that it is compatible with

the Wireless AP.

I can't establish connection with Wireless AP with WPA2 encr yption by

using Windows Zero Configuration

Update Windows XP with latest Wi-Fi Protect Access 2 (WPA2) through

windows update, or alternatively search Microsoft's support site for latest

copy of ser vice pack or patch for WPA2.

User Manual

1 2 ... 43 44 45 46 47 48 49 50

Keine Kommentare

AzureWave AW-GA220 Bedienungsanleitung Seite 48